SAPPHIRE TriXX tool received a major update to version 5.0. This handy tool is dedicated to brave souls among you who like to overclock your hardware and gain extra performance as well as those who enjoy tinkering with various profile options and per-app customization. Read on to learn more about the software and recent changes. The purpose of overclocking is to increase the operating speed of a given component. Normally, on modern systems, the target of overclocking is increasing the performance of a major chip or subsystem, such as the main processor or graphics controller, but other components, such as system memory or system buses (generally on the motherboard), are commonly involved.

ClockTuner for Ryzen: a program automatically increasing the performance of individual CCX blocks in Ryzen 3000 processors and at the same time reducing voltage and consumption

Overclocking and tweaking performance on Ryzen is not an easy thing because, compared to the automatic boost, it cannot often squeeze too much extra and silicon does not have large reserves. But if you are not satisfied with a “stock” processor, you will now be able to use automated OC. The new ClockTuner tool will allow you to automatically undervolt Ryzen 3000 CPUs or automatically overclock them, separately for both CCX blocks.

ClockTuner for Ryzen (abbreviated as CTR) is a program developed by Yuri “1usmus” Bubliy, author of the DRAM Calculator utility for Ryzen which was used to deduce recommended values for memory timings on Ryzen. It is a tool that optimizes the performance and consumption of the processor. While working with the 7nm Ryzen 3000 “Matisse” and Threadripper 3000 with Zen 2 architecture (and we can probably expect it to add support for Zen 3), it has no support for older Ryzen 1000 and 2000 CPUs.

This new utility has not been released yet, the author plans to make it available next month. However, the operation has already been previewed, the program has been examined by Linus Sebastian from the video channel Linus Tech Tips or for example a Guru3D web. The tool should also look for safe voltages for CPU undervolting and overclocking settings for individual CCX blocks.

It is an automatic tool that works in Windows (requires .NET) and automatically tests its stability similarly to other tools for automatic overclocking. The program gradually increases the frequency and tests whether the CPU remains stable – it uses its own built-in test based on Prime95 for this. The tool also requires the installation of Cinebench, but this software is not actually used to test the stability. ClockTuner only uses it to measure CPU performance before and after optimization.

As a result, the software should allow you to run some CCXs (those with higher quality silicon) at a slightly higher frequency than others can handle. Similar tuning can also be done manually with Ryzen Master, but this tool could make it easier. The best results should be achievable with processors that contain multiple CCXs – Ryzen 9 3900X, 3950X (four) or Threadripper (eight or sixteen CCXs).

Overclocking with ClockTuner has the advantage that the automatic processor control system with Boost and energy-saving technologies remain active, so it does not have such disadvantages as fixed overclocking of the CPU or individual CCXs to a given frequency. ClockTuner even (when undervolting is done) improves performance while reducing power consumption.

Guru3D states that they managed to get a 5% better performance with the Threadripper 3960X while reducing consumption by 4.5%; for the Ryzen 9 3900X a 7% performance improvement while reducing consumption by 9.5%. See these screenshots (the consumption is, however, probably read from the Package Power data from the processor sensors, so it may not be 100% accurate).

Interestingly, the tool works by communicating with non-public MSR registers of a processor, not the BIOS, so it can bypass the motherboard’s limitations which would not allow separate CCX clock tweaking in UEFI. The tool thus works with all motherboards, regardless of the brand.

More about the settings, usage and capabilities of the ClockTuner software may be said once it is officially released which is due in September. The download will be free, so anyone (who is interested in overclocking as such, including certain risks that they always bear) will be able to try it.

English translation and edit by Lukáš Terényi

First Overclocking Tool Download

• Contents

Overclocking a computer is a great way to bring the best out of it. However, it could be confusing when you don’t know about the right overclocking software for CPU, RAM or even GPU. The best tools can help you to do everything with ease without messing things up. So, it’d be wise to find out about them.

If you want to know about them, this post is specially written for you. Here, I will tell you about the 13 best Overclocking Software that you can use on your PC to overclock GPU, CPU, RAM, and other components.

Contents

• 2 13 Best Overclocking Software for RAM, CPU and GPU

What is Overclocking Software?

Overclocking is a method used to tune your computer by adjusting the power, voltage, core, memory settings, and other values of the system to bring the best performance out of the processor, GPU, RAM, and the Motherboard. Technically, it is the process of increasing the clock rate of a computer to the values that exceed the values certified by the manufacturer.

There are two ways to overclock your computer- one is to do it manually through the BIOS, and the other is by using an overclocking software. The former isn’t a viable option for the majority of the users, but the latter one is. An Overclocking software is a tool that allows you to adjust the clock rate of your computer’s components through its interface.

13 Best Overclocking Software for RAM, CPU and GPU

Overclocking software is a very useful utility for anyone who is new to overclocking as it really eases out the process. You just need to install the software and adjust a few buttons to tune any component. This can help you to speed up the components easily and get the most out of your PC. You can push your computer to the limits. But, make sure you don’t overdo it.

If you want to know which are the best overclocking tools that you should use, we have made a list of 13 best options. You can pick any of the software available here and start using it to unleash the true power of your PC.

1. Intel XTU

Intel XTU (Extreme Tuning Utility) is the official overclocking, tuning, and monitoring software for your Intel CPU. This tool is able to overclock CPU, cores, and Memory of CPU from Intel. It doesn’t support every CPU due to a number of restrictions. It has a clean and user-friendly interface. So, if you are new to this thing, this should be the best tool for you.

2. AMD Ryzen Master

AMD Ryzen Master is the perfect overclocking tool if you are using a processor from AMD’s Ryzen series. It is able to overclock your CPU to higher speeds and completes the job efficiently as it is built specifically for AMD Ryzen. Along with the overclocking feature, it is able to custom tune your computer for better performance and monitor it in real-time.

3. MSI Afterburner

MSI Afterburner is the best known overclocking tool for your GPU. There is a common misconception that it works only with MSI GPUs, but that isn’t true. It is completely compatible with any GPU, whether it is MSI, NVIDIA, or any other. You can use this great software to increase the clock rate of your GPU and play games smoother than ever. The gaming experts highly recommend it.

4. EVGA Precision X 16

EVGA Precision X 16 is an overall utility to overclock your GPU, CPU, and RAM. It is compatible with almost any computer you can think of trying it on. It comes with a sleek user interface that anyone can get hold of. Even if you are using it for the first time, you’d easily figure out how to use it. So, if you are looking to get the best performance out of your PC, you should definitely try it.

5. MemSet

MemSet is a popular overclocking utility for Windows computers. It is specifically developed to tune memory on your PC. It is not able to custom tune your GPU or CPU. But, if you only want to overclock the memory, then this is the right one for you to use. The best thing is that it is lightweight and free to use.

6. ASUS GPU Tweak II

ASUS GPU Tweak II is an amazing yet simple overclocking utility for Windows users. This program allows you to switch between different modes such as overclock mode, gaming mode, and silent mode. All the modes have different clock values and deliver performance accordingly. Since it is a premium tool, you can’t unlock its full potential for free.

7. CPU-Z

CPU-Z is a well-known CPU overclocking tool. It is a lightweight and free to use software that you can use to increase the core values and bring the best performance out of it. You can achieve that through a simple to use interface. There are no complexities. However, you can’t tune other PC components such as GPU with it.

8. GPU-Z

GPU-Z is another lightweight and free to use tool to overclock your GPU. It is developed and published by the creators of CPU-Z. It also has a clean and easily understandable user interface. You will learn everything just at the first glance. If you want to play some high graphics games, this will help you a lot.

9. SetFSB

SetFSB is a different type of tool from all other entries on the list. Basically, it is a tool to adjust system Front Side Bus speed and not an overclocking utility. The reason why I’m telling you about it is that it is able to enhance the performance of your PC. So, you can use it by combining it with the overclocking utility that you use.

10. SAPPHIRE TriXX

SAPPHIRE TriXX is the next overclocking tool specifically built for GPUs from SAPPHIRE. But, it is the only drawback of this tool as well. It may not support all the GPUs available. If you have a compatible GPU, then it is one of the easiest and most effective options.

11. CPU Tweaker 2.0

CPU Tweaker 2.0 is a widely popular overclocking tool for your CPU. You can use this lightweight and free to use software to increase the core values and unleash the best performance. It can help you to identify the real power of your CPU. The user interface is the highlight of this great software.

12. Riva Tuner

Riva Tuner is a brilliant driver-level GPU tweaking software that you can use to overclock your GPU. This tool is able to create profiles for different applications that you want to run. It also grants low-level hardware access for efficient profiling. Another useful benefit is that Riva Tuner also works as a system monitoring utility. The user interface is easy to understand and simple.

13. NVIDIA Profile Inspector

NVIDIA Profile Inspector is an ultimate tool to overclock your GPU while also viewing the graphics card information in real-time. It is simple to use, lightweight and serves its purpose very well. You should not expect it to custom tune all the components of your PC. But, if you want to bring the best out of your GPU, this is the right tool for you.

Final Take

First Overclocking Tool Software

These are the 13 best Overclocking software that you can use to unlock the real potential of your computer. Remember that Overclocking is great, but only up to a certain limit. If you cross that limit, you will end up damaging your computer. So, never overclock the components of your PC to the point that they end up heating abnormally, and eventually break down.

First Overclocking Tools

That’s all for this post. I hope you find it helpful. Feel free to share your opinions about it through the comment box. I’ll be glad to listen to you.